The dual-power mobile jaw crusher is equipped with direct-drive motors and intelligent energy management system. It operates with low noise and no exhaust gas in urban power conditions, and is suitable for mining and construction waste recycling projects. The unit can be customized according to demand, and common parts are available for easy procurement. We welcome inquiries for selection, sample assessment, and bulk quotations to customize a complete mobile crushing production line solution for you.
I. Product Introduction
The dual-power mobile jaw crusher adopts a diesel + external dual-source drive architecture, different from traditional pure diesel mobile crushing equipment. All executive mechanisms of the entire machine are driven by motors. Operators can freely switch between external grid power and on-board diesel generator sets based on the power supply conditions at the construction site. It is suitable for unstable power supply projects, low-noise demolition sites in cities, and long-term aggregate production, balancing production economy and site mobility.
II. Product Advantages
1. Seamless dual-power switching: With electrical interlock protection, grid power failure can automatically switch to diesel, supporting manual / automatic modes, with phase sequence and overvoltage protection to avoid production interruption and reduce fuel consumption.
2. Independent motor direct drive: Eliminates complex hydraulic structures, automatically adjusts feeding speed based on load feedback, soft start design, fast torque response, reduces the risk of blockage, and protects the electrical system.
3. Suitable for urban environmental protection sites: Grid power mode is low-noise and without exhaust gas; the entire sealed electrical compartment is dustproof and moisture-proof, prolonging the service life of electrical components, and meeting urban environmental control requirements.
4. Intelligent energy management: Real-time collection of energy consumption data to generate reports, diesel generator sets automatically idle when idle; motor cables have temperature monitoring, and load reduction is carried out step by step when abnormalities occur.
5. Common parts, flexible configuration: Common parts and regular models are available, the generator set can be selected as needed, power supply interfaces are reserved on the body, and it can supply power to on-site auxiliary equipment.
III. Competitive Advantage Compared with Similar Products
IV. Product Certification and Quality Assurance
1. Authoritative Certification: The equipment has obtained CE and ISO9001 quality management system certifications. Key electrical components, motors, and hydraulic components have third-party test certificates, meeting domestic mine safety production standards and overseas export customs clearance requirements, and can be directly used for foreign trade project bidding.
2. Full Process Quality Control System: From raw material steel cutting, frame welding, main machine precision processing to complete machine assembly, quality inspection checkpoints are set up for each process; before the entire machine leaves the factory, continuous no-load + load trial operation tests are carried out, and core functions such as dual power switching, overload protection, and electrical interlock are simultaneously tested. Non-conforming products are strictly prohibited from leaving the warehouse.
3. Quality Assurance Commitment: The main machine provides standard quality assurance services. Core components that are not damaged by human factors during the warranty period are provided with technical support and spare parts services; wear parts are provided with quality guarantee explanations separately. The factory comes with complete test reports, operation manuals, and electrical schematic diagrams, facilitating customer equipment acceptance, annual inspection, and archive storage.
This dual-power mobile jaw crusher breaks the limitations of a single power mode, offering flexible energy options and lower long-term operating costs. If you have project planning needs, please feel free to contact us to obtain technical solutions and quotations.
I. Product Introduction
The dual-power mobile jaw crusher adopts a diesel + external dual-source drive architecture, different from traditional pure diesel mobile crushing equipment. All executive mechanisms of the entire machine are driven by motors. Operators can freely switch between external grid power and on-board diesel generator sets based on the power supply conditions at the construction site. It is suitable for unstable power supply projects, low-noise demolition sites in cities, and long-term aggregate production, balancing production economy and site mobility.
II. Product Advantages
1. Seamless dual-power switching: With electrical interlock protection, grid power failure can automatically switch to diesel, supporting manual / automatic modes, with phase sequence and overvoltage protection to avoid production interruption and reduce fuel consumption.
2. Independent motor direct drive: Eliminates complex hydraulic structures, automatically adjusts feeding speed based on load feedback, soft start design, fast torque response, reduces the risk of blockage, and protects the electrical system.
3. Suitable for urban environmental protection sites: Grid power mode is low-noise and without exhaust gas; the entire sealed electrical compartment is dustproof and moisture-proof, prolonging the service life of electrical components, and meeting urban environmental control requirements.
4. Intelligent energy management: Real-time collection of energy consumption data to generate reports, diesel generator sets automatically idle when idle; motor cables have temperature monitoring, and load reduction is carried out step by step when abnormalities occur.
5. Common parts, flexible configuration: Common parts and regular models are available, the generator set can be selected as needed, power supply interfaces are reserved on the body, and it can supply power to on-site auxiliary equipment.
| Comparison project | Conventional mobile jaw crusher (pure diesel / pure single power supply) | Our MST dual-power mobile jaw crusher |
| Power mode | Single power source, wasted fuel on electrified sites, no power supply on non-electrified sites makes it impossible to generate electricity | Diesel + grid power dual sources can be seamlessly switched, supporting automatic interlock, automatic power switching in case of power failure, without interrupting production, significantly reducing long-term energy consumption costs |
| Electrical protection | Conventional simple electronic control compartment, dust easily invades, high failure rate in mining conditions | Fully sealed dust-proof and moisture-proof electrical compartment, equipped with multiple protections such as voltage, phase sequence, and high temperature, suitable for mining sites with large dust and unstable temporary power grids |
| Energy consumption management | No energy consumption recording function, unable to calculate fuel/electricity costs | Equipped with an intelligent energy management system, automatically recording working hours, power consumption, and fuel consumption, facilitating project cost accounting. The diesel generator set has an automatic idle shutdown fuel-saving function |
| Condition adaptability | Can only be adapted to a single scenario, separate equipment procurement is required for electrified and non-electrified sites | One machine can be used for two purposes, compatible with urban environmental control construction sites and unstable power supply quarry sites. One equipment can cover multiple project rotation construction, reducing the number of equipment purchases for customers |
| Blockage material protection | Basic overload protection, hard material impact can directly cause emergency stop | Load feedback intelligent feeding system, automatically reducing feeding speed when the material chamber is full, with step-by-step load reduction warnings, reducing the probability of sudden shutdowns, and protecting the main unit |
1. Authoritative Certification: The equipment has obtained CE and ISO9001 quality management system certifications. Key electrical components, motors, and hydraulic components have third-party test certificates, meeting domestic mine safety production standards and overseas export customs clearance requirements, and can be directly used for foreign trade project bidding.
2. Full Process Quality Control System: From raw material steel cutting, frame welding, main machine precision processing to complete machine assembly, quality inspection checkpoints are set up for each process; before the entire machine leaves the factory, continuous no-load + load trial operation tests are carried out, and core functions such as dual power switching, overload protection, and electrical interlock are simultaneously tested. Non-conforming products are strictly prohibited from leaving the warehouse.
3. Quality Assurance Commitment: The main machine provides standard quality assurance services. Core components that are not damaged by human factors during the warranty period are provided with technical support and spare parts services; wear parts are provided with quality guarantee explanations separately. The factory comes with complete test reports, operation manuals, and electrical schematic diagrams, facilitating customer equipment acceptance, annual inspection, and archive storage.
This dual-power mobile jaw crusher breaks the limitations of a single power mode, offering flexible energy options and lower long-term operating costs. If you have project planning needs, please feel free to contact us to obtain technical solutions and quotations.
